Siemens S7-scl, Проблема с редактором S7-SCL Опции

[PuzanZero]

Уважаемые знатоки, может быть кто-нибудь работал с языком программирования SCL в редакторе s7sclapx.exe? (C:\Program Files\SIEMENS\STEP7\s7scl\s7sclapx.exe)
Вы не знаете почему при создании проекта (File->New) может вылетать ошибка, что на скриншоте в приложении?
Я даже с их оффициального сайта скачал последнюю версию этого редактора, переустановил, но проблему это не решило...


---------------------------------------Текст Ошибки----------------------------------------------------------------
The project language of project Standard in C:\Documents and Settings\All Users\Application Data\Siemens\DESIGO\TOOLSET\XwpData\RC\XwpProjectTemplates\10a_LON_Small\1152789414\CFC is unknown and might be incompatible with the current Windows Language Setting (Русский), In order to edit the project, the correct Windows Language Setting is necessary.

Help on Message 256:140
Description of Error:
You have opened a project that was created with a STEP 7 version prior to V5.3 SP2. STEP 7 cannot determine the Windows language setting that was used when creating this project. However, it is very likely that it was created in one of the standard STEP 7 languages (German, English, French, Italian, Spanish). This means that there may be display and input problems with the current Windows language setting.
To Correct or Avoid Error:
Before editing this project, check with person who created it to find out what language setting was in force when the project was created. Then set this language in the Windows Control Panel and also specify it as the project language in the properties sheet for the project in STEP 7.
If this is not possible, be sure to check the symbols and the names of the objects. Correct them if necessary.
---------------------------------------------------------------------------------------------------------------------------

Сообщение отредактировал PuzanZero - 16.3.2016, 8:44

Прикрепленные файлы

 __________.JPG ( 204,47 килобайт ) Кол-во скачиваний: 28

 

[PuzanZero]

Уважаемые знатоки, может быть кто-нибудь работал с языком программирования SCL в редакторе s7sclapx.exe? (C:\Program Files\SIEMENS\STEP7\s7scl\s7sclapx.exe)
Вы не знаете почему при создании проекта (File->New) может вылетать ошибка, что на скриншоте в приложении?
Я даже с их оффициального сайта скачал последнюю версию этого редактора, переустановил, но проблему это не решило...


---------------------------------------Текст Ошибки----------------------------------------------------------------
The project language of project Standard in C:\Documents and Settings\All Users\Application Data\Siemens\DESIGO\TOOLSET\XwpData\RC\XwpProjectTemplates\10a_LON_Small\1152789414\CFC is unknown and might be incompatible with the current Windows Language Setting (Русский), In order to edit the project, the correct Windows Language Setting is necessary.

Help on Message 256:140
Description of Error:
You have opened a project that was created with a STEP 7 version prior to V5.3 SP2. STEP 7 cannot determine the Windows language setting that was used when creating this project. However, it is very likely that it was created in one of the standard STEP 7 languages (German, English, French, Italian, Spanish). This means that there may be display and input problems with the current Windows language setting.
To Correct or Avoid Error:
Before editing this project, check with person who created it to find out what language setting was in force when the project was created. Then set this language in the Windows Control Panel and also specify it as the project language in the properties sheet for the project in STEP 7.
If this is not possible, be sure to check the symbols and the names of the objects. Correct them if necessary.
---------------------------------------------------------------------------------------------------------------------------

Сообщение отредактировал PuzanZero - 16.3.2016, 8:44

Прикрепленные файлы

 __________.JPG ( 204,47 килобайт ) Кол-во скачиваний: 28